Material Transfer Isolator System
The Material Transfer Isolator System (MT-IS) is a safe and large hatch with integrated VPHP technology for the fastest bio-decontamination transfer process!
The stainless steel design is suitable for different cleanroom classifications.
BOOST YOUR EFFICIENCY, CUT DOWN YOUR DECON CYCLES TIMES!
Click on interactive point and explore all the features you should know about the new Material Transfer Isolator System
The MT-IS assures the highest air quality of the isolated environment thanks to:
– an engineered filtration system composed by High-Efficiency Particulate Air (H14) flow and exhaust filters;
– HYPER, Tema Sinergie’s integrated Vapour Phase Hydrogen Peroxide (VPHP) bio-decontamination system for very fast bio-decon cycle;
– inflatable seal made of FDA-approved White Silicon.
Maximizing the operators’ effectiveness is essential to minimize any risk of accidents, remove unscheduled downtime and boost production quality. Operators are assured the most comfortable working conditions by the outstanding ergonomics of the MT-IS.
The MT-IS can be equipped with an integrated Automatic Glove Leak Testing System (AGLTS) which performs an independent leak test cycle for each glove mounted on the isolator system according to the Positive Pressure Decay Method described in the international standard ISO 14644-7 Annex E.5. Wireless Wi-Fi data transmission based on a TCP/IP protocol. Recognition of the glove to be tested by means of Radio Frequency IDentification (RFID) Technology.
Detection of holes down to 100μm diameter.
The MT-IS is equipped with a routine automatic leak testing system which performs an independent leak test cycle according to the pressure change method (5.2) ISO 10648-2:1994(E).
A remote control module made of AISI 304 stainless steel allows direct access for all maintenance operations. A Virtual Private Network (VPN) connection allows a secure and private communication via Internet network and provides remote access and assistance, updates and maintenance any time, everywhere.
Thanks to the new sustainable low voltage ventilation fans, the isolator has a very low energy consumption throughout its life.
MT-IS is available in different standard dimensions.
The MT-IS can be upgraded with an Integrated Supervisory Control And Data Acquisition (SCADA) – iFIX with Historian Data Management Software (DMS) from GE Digital.
DataWall, a software application developed by Tema Sinergie for data management, is also available upon request.